News:

Hi!

Welcome to my DIY audio forum. The forum SW has been reset and unfortunately there were some problems with backup files so a few posts were lost, nothing important though.

Cheers
Per-Anders Sjöström

Main Menu

ssr-02 output voltage

Started by kentrout, November 20, 2012, 11:19:22 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

kentrout

I built the ssr-02 for -5v I followed your BOM, except the red led does not match your bom, it's just a clear red led... the opamp is the ad797.  for DZ1 I used the bzx79-c6v8.  I get -8.18 v out. Need to adjust closer to -5v.

Ken

perandersSMF

You should have a LED at the DZ1 position.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff

perandersSMF

/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff