Author Topic: QRV03 questions  (Read 3135 times)

0 Members and 1 Guest are viewing this topic.

Offline peranders

  • Administrator
  • Reached Nirvana
  • *****
  • Posts: 1230
  • Karma: +6/-0
  • Gender: Male
  • Forum owner
    • Sjöström Audio
QRV03 questions
« on: February 23, 2009, 09:10:59 PM »
6 Vpp, do you mean 3 V peak? The gain is set to 4.3 so 3 V in will give you 12 V out which is the clipping voltage.

Do you have 9.1 V over the zener diodes? Supply voltage for the opamps should be the zener voltage minus 0.7 V which is 6.4 V in your case. If you have PLUS 12 V at pin 7, something is wrong.

The volume pot can be connected at the input and the value 10-47k. 10 k is better.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff