When i first started RIAA, it did get quite warm. All four references on four Superregs and both buffers.
But now after on week or so when it has been on all the time, they all just slightly warm. Sound is ok
Tried to figure out why this cooling of things happen and only thing came to my min was that i had done something which made it drop out of class A or cooling is result of burn in.
So i measured output on voltage reference. When opamp is on place it shows 0, when opamp is out, it measures about -15.
Did also measure the current opamp takes. It is just below 9mA on negative and a bit over 12mA on positive.
Superregs are coupled for buffers and opamps separately, so they should not get equally warm, i presume.
Is all ok and should it run this cool? How do i know?
Regards,
Vesa
I can't really say what the problem is but it works :-D
Yes, and actually VERY well :)
Now with overkill PS: 4x SSR01/2 superregs + 4x Tentlabs Shunt regulators.
/V
[attachment deleted by admin]
... mm, you can't fail... :-D