Hi
I am currently building two of these boards for a pair of mono blocks- bridged mode....
Now the more I read the instructions, the more I get my wires crossed :)
One needs to be in inverted, one in non-inverted - but neither match the job Myers for bridged mode + also needs to be in parallel?
Probably straight forward but can some kind person let me know where the two wires of the one RCA goes and the red / black of the one speaker - and jumpers.... Pleaseeeeee :)
I will try and attach two pics to help...
Many thanks
Tony
http://sjostromaudio.com/pages/index.php/hifi-projects/119-pa03-pavel-dudek-s-deluxe-gainclone?showall=&start=2
Have you checked the section about bridged mode?
Hi P-A
Yes, but I've probably over complicated things in my head to much....
Basically - the one RCA in, do I connect the '-'to two of the wago points and same with the '+' ?
The speakers as per the bridged diagram but what about the jumpers? Both as bridged? Or one inverted one non?
Cheers
Connect exactly as the picture.
Signal to J2 +
Signal to J3 -
Ground to JP2 G
Short pin 3 and 4 in JP1
Short pin 17 and 18 in JP1
Thanks P-A!
I'll try that! And the RCA in on jp5?
The JP5 is the output. Please check also the schematics. The RCA, of you mean the input connector, or what?