Welcome to my DIY audio forum.

Per-Anders Sjöström

Main Menu

QRV-04 as a line stage

Started by peranders, October 09, 2006, 02:39:00 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


10 kHz, square wave. Slow, how do you mean? The QRV-04 has a lowpass filter at the input, R3, C5. This can be tuned to the value you like. If you have a pot this will have some influence. It is the total source impedance that counts.

The LP-filter is optional but I'll recommend it. You can decrease the 1 nF.

C6 may also be optional and/or tuned. The purpose of this cap is to force the feedback go directly from the opamp instead of via the buffer. This is more important when you use fast opamps.

If you have square wave as a test signal it's very important to compare the input signal with the output since you can have overshoots at the input (not perfectly matched impedance of the signal generator). Check also the oscilloscope probes.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff