News:

Hi!

Welcome to my DIY audio forum.

Cheers
Per-Anders Sjöström

Main Menu

Cool QSXM3

Started by VesaK, December 30, 2014, 06:36:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

VesaK


When i first started RIAA, it did get quite warm. All four references on four Superregs and both buffers.
But now after on week or so when it has been on all the time, they all just slightly warm. Sound is ok

Tried to figure out why this cooling of things happen and only thing came to my min was that i had done something which made it drop out of class A or cooling is result of burn in.

So i measured output on voltage reference. When opamp is on place it shows 0, when opamp is out, it measures about -15.

Did also measure the current opamp takes. It is just below 9mA on negative and a bit over 12mA on positive.

Superregs are coupled for buffers and opamps separately, so they should not get equally warm, i presume.

Is all ok and should it run this cool? How do i know?

Regards,
Vesa

peranders

I can't really say what the problem is but it works  :-D
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff

VesaK

#2
Yes, and actually VERY well :)

Now with overkill PS: 4x SSR01/2 superregs + 4x Tentlabs Shunt regulators.

/V




peranders

 ... mm,  you can't fail...  :-D
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff