News:

Hi!

Welcome to my DIY audio forum. The forum SW has been reset and unfortunately there were some problems with backup files so a few posts were lost, nothing important though.

Cheers
Per-Anders Sjöström

Main Menu

QSXM2 current neccesary

Started by fantast, December 22, 2011, 07:38:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

fantast

December 22, 2011, 07:38:52 PM
heaveno,

just about to start my QSXM2 project and preparing for the power supply.
I would like to use a +/- 15V source and I am unsure about the current, necessary to run the unit (both channels or one channel, only). Any remarks or help on this is very welcome.

Best regards
Claus

peranders

#1
December 22, 2011, 07:50:18 PM
Hi!

You will need 100 mA per channel.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff

fantast

#2
December 22, 2011, 08:30:48 PM
Mange tak!
Claus
Print
Go Up Pages1
User actions