Welcome to my DIY audio forum.

Per-Anders Sjöström

Main Menu

QRV03 questions

Started by peranders, February 23, 2009, 09:10:59 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


6 Vpp, do you mean 3 V peak? The gain is set to 4.3 so 3 V in will give you 12 V out which is the clipping voltage.

Do you have 9.1 V over the zener diodes? Supply voltage for the opamps should be the zener voltage minus 0.7 V which is 6.4 V in your case. If you have PLUS 12 V at pin 7, something is wrong.

The volume pot can be connected at the input and the value 10-47k. 10 k is better.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff