Page 8 of 8
Technical data
Not confirmed data with the opamp LT1115.
| Frequency response: | 0 Hz - 20 MHz, -3 dB (!) |
| Frequency response with input filter | 1,5 Hz - 338 kHz, -3 dB |
| Power bandwidth at 10 Vrms, 50 ohms: | 0 Hz -2 MHz, -3 dB |
| Equivalent input noise: | 100 nV |
| Signal to noise ratio: | 137 dB |
| Dynamic headroom: | 157 dB |
| Distortion: | < 0,0002 % |
| Slew rate: | 60 V/us |
| Step response: | Perfect without overshoot |
| Gain: | 4 (12 dB) |
| Input impedance: | 100 kohms |
| Output impedance: | 3 milliohms |
| Damping factor: | 16000 with 50 ohms load |
| Output current: | 1 A peak |
| Supply voltage | +- 16-20 V |
| Dimensions: | 142.2 (5.6") x 157.5 (6.2") mm |
