Print Page - QSXM2 current neccesary

Title: QSXM2 current neccesary
Post by: fantast on December 22, 2011, 07:38:52 PM

heaveno,

just about to start my QSXM2 project and preparing for the power supply.
I would like to use a +/- 15V source and I am unsure about the current, necessary to run the unit (both channels or one channel, only). Any remarks or help on this is very welcome.

Best regards
Claus

Title: Re: QSXM2 current neccesary
Post by: peranders on December 22, 2011, 07:50:18 PM

Hi!

You will need 100 mA per channel.

Title: Re: QSXM2 current neccesary
Post by: fantast on December 22, 2011, 08:30:48 PM

Mange tak!
Claus

Sjöström Audio DIY forum

Projects => Phono RIAA amplifiers => Topic started by: fantast on December 22, 2011, 07:38:52 PM