I am currently building two of these boards for a pair of mono blocks- bridged mode....
Now the more I read the instructions, the more I get my wires crossed :)
One needs to be in inverted, one in non-inverted - but neither match the job Myers for bridged mode + also needs to be in parallel?
Probably straight forward but can some kind person let me know where the two wires of the one RCA goes and the red / black of the one speaker - and jumpers.... Pleaseeeeee :)
I will try and attach two pics to help...
Have you checked the section about bridged mode?
Yes, but I've probably over complicated things in my head to much....
Basically - the one RCA in, do I connect the '-'to two of the wago points and same with the '+' ?
The speakers as per the bridged diagram but what about the jumpers? Both as bridged? Or one inverted one non?
Connect exactly as the picture.
Signal to J2 +
Signal to J3 -
Ground to JP2 G
Short pin 3 and 4 in JP1
Short pin 17 and 18 in JP1
I'll try that! And the RCA in on jp5?
The JP5 is the output. Please check also the schematics. The RCA, of you mean the input connector, or what?