Sjöström Audio DIY forum

Projects => Phono RIAA amplifiers => Topic started by: peranders on April 15, 2008, 08:11:12 PM

Title: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on April 15, 2008, 08:11:12 PM
Specifications of my new RIAA amp project can be found here (http://sjostromaudio.com/pages/index.php/hifi-projects/131-qsx03-phono-amp-with-passive-riaa-network)

Please add ideas and wishes here if you want.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: rclourenco on July 15, 2008, 11:03:00 PM
 :-D
Fantastic I will wait very nervously for this, by the list of features you publicited it looks very, very promissing.

Another Idea, have you tought about going Battery powererd?

And adjustable gain?

Balanced its a must, the rest very good, please don't forget about the power supply its a must to have the best.

regards,
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on July 18, 2008, 10:00:04 AM
About gain, see item 2 in my wish list!

Battery, no not by me but can't see any problems if you want to use batteries.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: roberto.missoli on December 13, 2008, 05:59:55 PM
And what about to have Pseudo-Differential input (as an optional configuration)?

[attachment deleted by admin]
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on December 13, 2008, 08:55:55 PM
Nothing stops you to use the "b" configuration but I will not incorporate a true balanced input just because this is extremely rare.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: enzedone on January 20, 2009, 06:57:28 AM
I don't know much about this sort of stuff, except I would like it to be switchable between MC & MM without having to open the case and change resistors  and the likes to match up cartridges.
Just my simple thoughts.
Edit: Sorry....just read the title page for this project.........Doh!


Brett.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: sek on April 18, 2009, 04:28:49 PM
Hi there,

what impedance level can be tolerated in the passive network?

I'm asking because larger resistances allow for smaller capacitances - and this would in turn allow for either high quality and/or small size capacitors.

As an example, I'm thinking of NP0 ceramic capacitors in the network. They are easily available as SMT or thru-hole parts up to around 3.9nF, but not larger.

On the other hand, the network takes physical space to lay out on a PCB, which gives inductance to the board traces. The higher the impedance, the more sensitive the network gets - leading to EMI and increased noise level.

Using capacitors in the single nanofarads brings the series resistor up into the hundreds of kiloohms. Would this be a problem inbetween two opamp stages?

Small, inexpensive, high precision components can never hurt. And the prospective of a tiny PCB routing area with short traces is intriguing. :wink:

Cheers,
Sek.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on April 18, 2009, 05:55:01 PM
I can't tell you right now but higher impedance will be more sensitive against stray capacitances => not so go RIAA curve unless you can measure it and adjust it accordingly. It's also important to not generate more noise than necessary.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: byggareandy on September 23, 2009, 07:30:00 PM
Hi, I'm about to build me a RIAA amplifier. Is this one to be finished in a near future? /Andreas
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on September 23, 2009, 09:27:41 PM
I'm afraid we are talking about the distant future right now.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: enzedone on September 23, 2009, 11:56:11 PM
Good things come to those who wait..... :-D

I lost money on Rhys,s 'Phono 3' boards GB. Money I'd rather have spent on my little boy.
So no more rubbish projects for me. I'll just wait for this project to be completed. And at least I know that it will be well produced and well organised and honest.
Peranders, your boards are always very nice.... :-). Thanks for producing them for idiots like myself with no ability.

Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on September 24, 2009, 06:35:30 AM
Thanks, but the hope for Rhys isn't completely gone. If stuff turns up here tomorrow, there will be some hope after all.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: byggareandy on September 24, 2009, 10:39:36 AM
What will the main improvements be from your QSX Mark III? Is there something outstanding with your new RIAA that would make it worth waiting for. /Andreas
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on September 24, 2009, 09:24:28 PM
Using passive correction is just an another flavor. That's all.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: goldkenn on November 08, 2009, 10:11:20 AM
Any news update?
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on November 08, 2009, 10:56:10 AM
On hold I'm afraid. I'm working on an ECC88 buffered Gainclone.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: goldkenn on March 04, 2011, 08:06:25 PM
2011, any chance you come back to this new phono project again?
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on March 04, 2011, 08:58:43 PM
It's possible but i won't promise anything.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: goldkenn on March 05, 2011, 05:31:48 AM
Of course no and no need any promising, as long as you back to working on it, not drop it as before, fans as me we all willing to wait. just want to make sure the project will be go on or simply cancel.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on March 05, 2011, 09:35:17 AM
My tube buffered Gainclone is in the pipe right know and the vinyl amp comes second.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on April 07, 2013, 12:16:25 PM
Still on hold... but I really long for this project.
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: goldkenn on March 16, 2015, 02:31:21 PM
2015 now :-D
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: peranders on March 16, 2015, 04:25:25 PM
.... yeah I know...
Title: Re: QSX03 A new RIAA amp with passive RIAA correction
Post by: goldkenn on March 04, 2023, 09:05:31 AM
20230 =P