News:

Hi!

Welcome to my DIY audio forum.

Cheers
Per-Anders Sjöström

Main Menu

SSR02 fixed voltage, fine adjustement and DZ1 Qs

Started by Malefoda, March 27, 2010, 03:39:34 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Malefoda

R15 is not on BOM nor picture, that may be where I'll get my way.

peranders

R15 is not used but I have it in my calculations (= GOhms).
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff

Malefoda

10K 1% was 9.90, enough to drop what I needed ;)
Fixed!
Many thanks Per-Anders!

peranders

... and you have a calibrated multimeter?

My experience is that it's very rare to get resistors more than 0.3% wrong. Still if you want so exact output voltage you must also use a calibrated instrument.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff

Malefoda

#19
Well I know my DMM, a good Chauvin & Arnoux, is out of tune. Maybe 15 years it has not been calibrated and it should be done.
You are right, to make good work use good tools, I'm on the ghetto mode...
Anyway I have a second pack of metal film resistors, but 1/8W only (it runs cold seems) and these 10K show between 10.01 and 9.98... all that 1/4W ones are around 0.992/0.996, all other resistors I have match the specs.
For me it's a bad batch :'(