Sjöström Audio DIY forum

Projects => Headphone amplifiers => Topic started by: mabu0815 on October 15, 2015, 02:06:45 PM

Title: QRV08 - IC4/5 and IC 8/9 LM431 must be populated?
Post by: mabu0815 on October 15, 2015, 02:06:45 PM
Hi PA,

I have a question regarding QRV08:

- IC4/5 and IC8/9 the LM431 is not seen on the picture of the populated board and in the BOM there is no order No. given/marked as "not used".
In the circuit diagram they are shown as both installed.
Can they be omitted?

Thanks

Sven
Title: Re: QRV08 - IC4/5 and IC 8/9 LM431 must be populated?
Post by: peranders on October 15, 2015, 07:09:34 PM
The IC5 and IC9 are TO92 type, hole mounted. You only need one of the parts, SMD or TO92.
Title: Re: QRV08 - IC4/5 and IC 8/9 LM431 must be populated?
Post by: mabu0815 on October 16, 2015, 11:36:58 AM
Hi,

Ok, I see. Thank you.
As far as I can see, Elfa now has the SMD part offered: 73-285-40

Sven