Sjöström Audio DIY forum

Projects => Power supplies => Topic started by: ramagochi on January 03, 2011, 09:54:39 PM

Title: SSR01 use
Post by: ramagochi on January 03, 2011, 09:54:39 PM
heaveno,

I'm assembling a SSR01 at 18V for power up a Pass B1. My plans are do a bridge rectifier with a MUR102 diodes (With a 18V transformer) and will connect it to a SSR01, Need I filter this bridge before connect to a SSR01?, any suggestions?.

I'm using on the SSR01 a LM329 and a LT1028.

Best Regards
Title: Re: SSR01 use
Post by: peranders on January 03, 2011, 10:11:21 PM
You will need 470-2200 uF.