News:

Hi!

Welcome to my DIY audio forum.

Cheers
Per-Anders Sjöström

Main Menu

QRV-07 gain

Started by peterklimo, November 11, 2007, 10:19:44 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

peterklimo

Hi peranders,
I assembled QRV-07, it works perfect, but I need higher gain, because amp plays quietly with less sensitive models like AKG K701 and sennheiser HD 595.

I use 50k ALPS blue velvet pot at the input of the amp. Is it enough to change values of resistors R4 or/and R5 ? When I understood it right, in your original configuration is gain set to 2 -  R5/R4 + 1. Can I increase it for example to 3 ?

peranders

It's very easy to set the gain you'll desire. If you already have 1k you can solder an another 1k on top of R4.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff

peterklimo

Ok, I changed gain to desired value. I have another question to you:

Is it possible to use QRV 07 as a preamplifier ?

peranders

Sure, it's perfect actually. It can drive anything with ultralow distortion.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff