News:

Hi!

Welcome to my DIY audio forum.

Cheers
Per-Anders Sjöström

Main Menu

QSXPS output

Started by gianluca, August 30, 2007, 04:05:24 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

gianluca

Ciao everybody!

During my holidays I terminated my pre-phono (2xQSXPS+QSXM2). I'm really happy and satisfied, but I've a problem with the output of the two QSXPS.

It was impossible to obtaine more than ±11.2 volt from the outputs of the two QSXPS. The only solution that I've find  (temporary solution) it's to connect in parallel at the two R45-R47 (and R46-R48) a 2,2k resistor. Now with the 3 resistors is possible to regulate the output to ±18 volt.

What's do you think, where is my error?

Someone can help me?

[attachment deleted by admin]

peranders

If you have a 5.00 volt reference voltage at IC3 and to the input of IC1, pin 5. That's correct. If only R43, 45 and 47 are mounted you should get 15 volts out. R49, P1 is an option if you want to trim the voltage but the values must be calculated so you'll get the right trim range.

If you want 12 V R43 should be 3.9k.

(3.9/(5.6//5.6)+1)*5 = 12

// = in parallel
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff