Welcome to my DIY audio forum.

Per-Anders Sjöström

Main Menu

World class SMD -> DIL adapters

Started by peranders, October 02, 2006, 12:49:30 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


I and Sigurd Ruschkowski and have developed a series of adapters for Svalander Audio and the documention can also be found there.

I claim this: They are the best in the world!

Interesting features:

  • Possibility to use both smd parts and hole mounted parts for additional decoupling. At the picture you can see that almost any type will fit including Black Gates
  • Adapter for SO16 with a minimal footprint, for example AD745, an ultra low noise JFET opamp
  • You can have a grounded decoupling. This is something unique.
  • You can have a grounded decoupling and decoupling between + and - at the same time. See the picture. This is really something unique. No adapter in the world has that and this may sometimes be important if you plan to use demanding high speed, high performance opamps.
  • Doublesided pcb with plated holes.
  • Highest quality when it comes to pcb material, compliant to RoHS (lead free).

Notice that the pictures show the prototypes which were made of 1.6 mm pcb. The series products are made of 1 mm pcb, otherwise the same.

As suggested you can use goldplated pins but the holes are big enough for Molex pins with a square cross section, goldplated or not.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff