Welcome to my DIY audio forum.

Per-Anders Sjöström

Main Menu

JSR04, answers to Mark

Started by peranders, September 15, 2006, 01:01:35 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


The transformer should be 2 x 15 V AC and at least 20 VA

You may also use external heatsinks depending of if you really want to take out 500 mA continuously

The series resistors at the input should be 1 ohms or so, not the small 10 ohms.

Which voltage reference do you plan to use, LM431? I will calculate the feedback resistor values for you.

Set the reference to 6 volts (= 12 volts out)

R43 = 6.8 k
R45 = 4.7 k
This will give you approx. 12.2 Volts.

P3, R41 not used
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff