Welcome to my DIY audio forum.

Per-Anders Sjöström

Main Menu

ssr01 wrong output

Started by tamu, January 20, 2012, 08:41:42 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.


If the LED won't pass the diode test it may be broken. It's rather easy to damage it with too much heat.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff


I removed the H1 and tested it again. it was working fine when off board. soldered it back on and now it doesnt light up with the diode test.. something else must be the problem. :?