News:

Hi!

Welcome to my DIY audio forum.

Cheers
Per-Anders Sjöström

Main Menu

Power supply for dc turntable controller

Started by KMMM, January 10, 2010, 10:50:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

KMMM

Hi

I might have got hold of a set of mark kelly motor controller PCB's
These are ment to be powered by a 12v battery but I do have a RFB02 rectefier bridge and a JSR05 (12v) from an old DAC project.

I whonder what to use...?

Is it possible to use the above? should i try to source a tricle charger board and use a battery as intended?
What are the pros and cons here?

I'm a newbe...

Would apriciate any advice  :-)

KMMM

#1
here's some more info on the controller:
http://www.basenjes.de/tubes/data/sb/TT_Motor_Controller_SB_Doc_Ver_1.4.pdf


The boards I might get hold of are not the first type in this PDF but it's the original set from Mark kelly, I belive.
I wish I could get hold of the first PCB withe everyting on one board...

peranders

A super regulator can be used if the current is under 1 A.
/Per-Anders Sjöström, owner of this forum

Homepage with my DIY hifi stuff